Making Jewelry Storybook--Lines Bracelet

 What was it?

The last posting of what I had on the bench, I asked you to guess what it was I was making. I finished it and finally took some photos of it. You see the teaser below? It's a bracelet, all right!

This is how I made it

First, I started with a bracelet blank; a strip of 16 gauge silver that is 6" long. I took pieces of wire and formed them into various shapes, and melted some scrap silver into balls. You can see most of this laid out on the charcoal block. If you're wondering what the white crud is that's all over the metal, it's a flux that prevents firescale. Sterling is notorious for taking up cupric oxide and it leaves a nasty purplish stain in the metal if you don't take steps to prevent it from forming.

All the wires are sanded so they'll sit flush on the bracelet blank. The wires are soldered on a few at a time, with cleaning baths in pickle in between solderings, and of course, more flux to prevent firescale before soldering again.

Here you can see the wires all soldered and the form pre-polished, before filing and forming the blank into the bracelet.

And now the purdy...

I love the movement of the lines on the bracelet, and how that movement changes, depending on which angle it's viewed. You can go to this link to see a few more pictures of the Flowing Lines bracelet from different angles:

http://www.etsy.com/listing/88543681/flowing-lines-sterling-silver-cuff

Thanks for stopping by to read! You can find more stories on Making Jewelry Storybook posts. Learn how handmade jewelry goes from sheet and wire to be fabricated into volumetric and gorgeous jewelry.

Copyright 2011 by Katherine Palochak

Making Jewelry Storybook--Honking Big Amethyst Pendant

I thought people might be interested in the steps taken for making studio jewelry. I'm not trying to do a tutorial, but rather to show how a piece begins its life through a storybook style of how it comes to be. So here's the first story:

No fancy photos here, just shot off my bench as I'm working. This one began with a stone that I picked up from a gem show. You can see some of the other amethysts at this particular show, including the one featured below at this link: http://jazznjewelry.blogspot.com/2011/05/stone-shopping-at-gem-shows.html

The honking big amethyst

So here's the stone. It's a big honking amethyst that's over 20 carats, beautiful saturated royal purple color with flashes of violet. Its cut is nice, but because of its size, it has to be set carefully so the point doesn't make contact with someone's skin. You can see a substantial bezel that I've made sitting right behind the amethyst.

Here you see the bezel with a shoulder bearing soldered in. The bearing will support the amethyst.

Adding the details

Now you see the setting made with some scroll work and it has been cut out of the background sheet and pre-polished.

And here's the finished pendant with a generous hidden bail.

It has since gone to a gallery in Laramie, WY. The owner's wife was more than helpful in helping him choose what to put in, and this was the first piece she glommed onto.

If you've enjoyed the step-by-step story of how a piece of jewelry is made, look for similar stories in the "Making Jewelry Storybook" sections.

Copyright 2011 by Katherine Palochak